The Interchangeability of Ford 4-Speed Shifters From 1962 to 1973

[ad_1]

There is no these point as a Ford Mustang, Fairlane, Galaxie 4-pace shifter. even though, the shift handles will interchange for the most part, they will only be right for their designated software. There are around 30 specific handles applied throughout the interval. All Handles with a reverse lock out up to January 2, 1968 experienced a 1′ 7/8 bolt spacing after that their was a 2 “bolt…Saddles can be improved to accommodate switching handles all-around from one product or yr to a different.

Exceptions to the interchangeability rule include the Galaxie Top Loader linkage from 1964-65 it will also match the Fairlane and Tiger top loader for the exact same yr, also the T10 Galaxie linkage will also in good shape a T10 Fairlane transmissions. This is the situation even although the Fairlane transmission is 2″ shorter.

In 1969 Ford transformed the 4-velocity shifters to eradicate the cable lock out. The lock out feature was developed into the shifter regulate system itself. This aspect was a brittle stamped metal piece, It commonly broke at about 65, 000 miles dependent on use also the primary spring experienced the exact breakage problem. While the management mechanisms were being fundamentally the very same involving Mustang, Torino and Galaxie the linkages had been distinct and the shift handles were being various. Only the Mustang Major Block use an adapter plate and this unit was use only for a person yr.

Ford went to the Hurst shifter in 1970 and was use by Mustang/Cougar and Torino/Cyclone only, even even though the 1970 adapter plate. experienced a Large Ford aspect variety they by no means place a 4 speed in a Galaxie. that plate was employed for Torino/Cyclone only and for the Mustang three diverse adapter plates have been made use of they had been the Huge Block, Smaller Block and Boss 429. The Hurst Handles in 1970-71 were flat and 1972-73 were spherical both equally experienced Hurst emboss on them and in each situation the Torino/Cyclone handles were longer than the Mustang, but the round handles in1972-1973 were only a bit lengthier.

The housing in 1970 Hurst shifter management mechanism have been cad plated and in 1971-1973 had been black oxide. 1972-73 Torino/Cyclone regulate mechanisms were being diverse then the 1970-71 and employed a stamped metal adapter plate and their were no portion quantities on the plate.

In summary when it arrives to Ford 4-velocity shifters you can by no means say never ever and you can hardly ever say generally, their is on this kind of matter as a combination shifter for the duration of that era. If you are restoring 1 of these versions and need shifters areas be aware of these differences it can help save you time and money. Know your supply and wherever you get your Ford 4-pace shifter pieces so your project goes smoothly.

[ad_2]

Source by William Heeley

Leave a Reply